Understanding take away a graphics card is a type of issues that is nearly sure to come in useful in the future if you happen to personal a desktop PC.
It would not matter in case you have the greatest graphics card on this planet or the very best low-cost graphics card you might discover, there’ll come a day if you’ll need to clear it, improve it, or troubleshoot it. Nonetheless, given the truth that some GPUs are very costly, eradicating them out of your PC case can really feel like a fairly intimidating course of at first.
Don’t fret—eradicating a graphics card is fairly straightforward and usually would not require any particular instruments, nevertheless it’s vital to take action safely to guard your PC. Luckily, I have been constructing PCs for a few years, and I am right here to indicate you take away a GPU out of your PC safely and confidently.
TOOLS & REQUIREMENTS
- A PC with a discrete graphics card (not a laptop computer or all-in-one PC)
- Anti-static wrist strap (non-compulsory, however really useful)
- A Phillips-head screwdriver (measurement #2 is often perfect)
- A clear, flat workspace (not a carpet)
Fast steps for take away a graphics card
- Energy down your PC and unplug all of the cables.
- Floor your self by touching a steel a part of your PC case. If potential, put on an anti-static wrist strap to maintain your PC protected from damaging static discharges.
- Place the PC on a secure floor. Take away the facet panel of your case. Some instances would require a screwdriver, however most trendy instances have thumbscrews or latches.
- Find the GPU. Be aware of its positioning, any latches, brackets, screws, and cables holding it in place.
- Disconnect all of the cables from the GPU. Be light.
- Unscrew the help bracket from the backplate close to the monitor ports.
- Search for the PCIe slot launch close to the tip of the PCIe connector in your motherboard—it is often a small plastic latch or tab. Press it down or slide it to launch the cardboard.
- Grip the GPU by its edges and gently take away it from the case. Do not seize it by the fan blades.
Step-by-step information
1. Flip off your PC
This could come as no shock—you may must flip off your PC in an effort to take away the graphics card. Flip it off in Home windows after which use the swap behind the case to totally energy it down.
2. Unplug all the things
Unplug each single cable that is related to your PC. Most significantly, make it possible for the ability cable connecting your PC to the wall outlet or energy strip is unplugged.
Watch out with a few of them. Most are straightforward, however you may must press down on the DisplayPort and Ethernet cables if you happen to’re utilizing one, and DVI must be unscrewed as a substitute of being yanked out (uncommon on newer PCs).
3. Take away the facet panel
Decide up the PC and place it on a flat, clear, non-static, safe floor, such because the desk.
Subsequent, floor your self by urgent your palms towards the steel a part of the case. Higher but, use an anti-static wrist strap.
Take away the facet panel by unscrewing thumbscrews or common screws, or urgent a latch—verify your case. Set the PC down on the opposite facet.
4. Discover your GPU
Typically, the GPU can be not possible to overlook. It is huge and connected to the PCIe slot in your motherboard.
Observe its energy cables, bracket screw, and PCIe latch location (typically a small, black piece of plastic beneath the GPU).
5. Disconnect all the things
One after the other, disconnect all the things that is related to your GPU. This consists of the 6-pin, 8-pin, or 12-pin connector from the ability provide. Gently press the clip and pull it straight out.
If there’s extra cabling, similar to RGB cables or custom-loop liquid cooling tubes, these should be disconnected too.
6. Unscrew the bracket
Your GPU sits within the PCIe slot in your motherboard and is screwed to the case through a particular bracket. It is time to take away it.
Seize your Phillips screwdriver and unscrew the bracket securing the GPU to the case. It’s going to be at the least one, possibly two, relying in your GPU, and it will be close to the monitor ports behind the PC case. Keep in mind: The screws might be both inside or exterior of the case, relying on the case’s design.
Tip: Excessive-end GPUs typically include an anti-sag bracket. You could must unscrew or unclip that too, often close to the cardboard’s far finish.
7. Take away the cardboard from the PCIe slot
Discover the PCIe slot the place your card sits. There will be a small, 99% of the time black, plastic latch or tab. That is the important thing to eradicating your graphics card.
Press or slide it (motherboard model-dependent) to free the GPU.
Be very light.
8. Pull out the GPU
Rigorously raise the cardboard straight up and out of the PCIe slot and maintain it regular. Don’t seize it by the fan blades and be careful; some GPUs are surprisingly heavy.
Set the cardboard down on a clear, non-static floor. Higher but, put it in an anti-static bag if you’ll be storing it.
Last ideas
Given the customarily excessive price of graphics playing cards at present, it’s very comprehensible to be concerned if you have to take away a graphics card out of your PC. In any case, no person desires to smash a significant PC element that might price a considerable sum to interchange.
With that mentioned, now that you have discovered take away a graphics card safely, you may discover that it is not practically as tough or sophisticated because it might sound, supplying you with the flexibility to scrub or improve your GPU as wanted with confidence.
- set up AMD drivers
- set up Nvidia drivers
- arrange a gaming monitor
No Comment! Be the first one.